qualitest2016 No Comments

Welding Inspection Services in Victoria BC

Welding Inspection Services in Victoria BC

Qualitest Canada provides Welding Inspection Services in Victoria BC through its highly qualified CWB Level 2 / Level 3 inspectors. The service area includes Victoria, Surrey,  Vancouver, Langley, Richmond, Delta, Burnaby, Kitimat, Dawson Creek, Kelowna, Kamloops, Edmonton, Calgary, Red Deer, Peace River, Grande Prairie, Fort McMurray, Regina, Saskatoon etc…

Qualitest Canada’s inspectors have completed many Welding Inspection projects in the past including industrial, institutional and commercial sectors. We take care of your Welding Inspection project at any stage you need our service. Our inspectors will visit to your project site and perform the inspection tasks as per the project requirements.

We are capable of providing full range Welding Inspection Services in Victoria BC area including visual inspection, magnetic particle testing, ultrasonic weld testing, lamination scans, hardness testing and bolt torque testing at the fabrication shop or in the field at the job site. In the past, our inspectors have performed full visual inspection on offshore drilling platforms and onshore large structural steel projects such the installation of huge structural steel components and piping at various commercial and industrial projects in lower mainland, BC. As we have many years in the Welding Inspection Services and testing business, we guarantee you with the experience and knowledge you are looking for. We offer a “One-Stop” testing and Inspection service that is second to none. Our Inspectors will perform top notch inspection tasks at your project site including but not limited to the following.

  • Reviewing the blue prints and IFC drawings
  • Reviewing the ITP (Inspection Test Plans)
  • Reviewing the Welding Procedures and Welders Tickets
  • Performing a material verification and heat number checks
  • Ensuring the welding equipment calibration
  • Verification of the welding filler material quality and heat numbers
  • Performing weld visual inspection
  • Flagging for NDE and preparing NDE request
  • Follow up with third-party NDE company for Non-Destructive Testing
  • Coordination for Pressure tests
  • Performing walk downs with client representatives

Contact us admin@qualitests.com today to get a quote.

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020

qualitest2016 No Comments

Welding Procedure Preparation Services in Vancouver BC

Welding Procedure Preparation Services in Vancouver BC

Qualitest Canada provides world class welding engineering services including welding procedure preparation and welder testing through it’s highly experience engineers and professionals. Qualitest Canada serves all over Western Canada including Vancouver, Surrey, Langley, Richmond, Delta, Burnaby, Victoria, Kitimat, Dawson Creek, Kelowna, Kamloops, Edmonton, Calgary, Red Deer, Peace River, Grande Prairie, Fort McMurray, Regina, Saskatoon etc…

Qualitest Canada is a world leader in Engineering, designing, testing and training for various applications. Our highly experienced welding engineers and technicians will design welding procedure specification (WPS) based on your requirements and applicable codes and standards such as ASME, CWB, API, CSA, AWS and etc.

Qualitest Canada’s welding engineers have completed many welding engineering projects in the past including industrial, institutional and commercial sectors. We take care of your welding procedure development or any welding engineering projects at any stage you need our service. Our lead engineers will visit to your office or project site when there will be a requirement.

We are proud of our long history in successful designing and documentation of welding procedures for a broad range of applications. Qualitest Canada’s experienced engineers solve challenging problems regarding welding procedures and PQR preparation. Qulaitest provide additional services as following:

  • Evaluate the existing welding procedures
  • Perform welding quality control inspections and prepare documentation
  • Supervise and inspect critical weld procedures in the field
  • Prepare quotes for the welding part of a project

We have state of the art equipment at our facilities and all the PQR materials & sample preparation will be done in-house. Our highly experienced staffs who can jump into any new welding engineering assignment immediately after we receive the project.

Contact us admin@qualitests.com today to get a quote.

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020

qualitest2016 No Comments

Pipeline Inspection Services in Vancouver BC

Pipeline Inspection Services in Vancouver BC

Qualitest Canada offers top notch pipeline inspection services in Vancouver BC through it’s highly experience Inspectors and professionals. Qualitest Canada serves all over Western Canada including Vancouver, Surrey, Langley, Richmond, Delta, Burnaby, Victoria, Kitimat, Dawson Creek, Kelowna, Kamloops, Edmonton, Calgary, Red Deer, Peace River, Grande Prairie, Fort McMurray, Regina, Saskatoon etc…

Qualitest Canada is a world leader in Engineering, designing, testing and training for various applications. Our highly experienced inspectors and technicians are immediately available to take any size of the pipeline inspection projects in Western Canada. Qualitest Canada’s inspectors have completed many pipeline inspection projects in the past with a great success. We take care of your pipeline projects at any stage you need our service. Our lead Inspectors will visit to your office or project site when there will be a requirement.

Qualitest Canada provides various inspection services for pipelines projects including, pipeline crawler NDT, AUT Internal Camera vehicles, welding inspection, Coating Inspection etc. We have been involved with the evolution of ultrasonic pipeline inspection of welds through the adoption of DNV criteria and are recently supporting the use of ASME Code Case criteria for both ToFD and Phased Array inspections. Building customer satisfaction through Service expertise, Safety and Reliability, we can assess the current state of equipment by detecting flaws and failure mechanisms at their initial stages. Such resolution is extremely important in regards to Pipeline Integrity Assessment. Some of Qualitest Canada’s NDT services with pipelines have included both weld assessments and integrity inspections of the following pipelines:

  • Water
  • Steam
  • Natural Gas
  • Crude and other oil products
  • Sour Gas
  • Tar Sand / Bitumen
  • Mineral Slurries
  • Caustic or Acid
  • Air

Contact us admin@qualitests.com today to get a quote.

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020

 

qualitest2016 No Comments

Structural Steel Inspection in Victoria BC

Structural Steel Inspection in Victoria BC

Qualitest Canada provides Structural Steel Inspection in Victoria BC through it’s highly qualified CWB Level 2 / Level 3 inspectors. The service area includes Victoria, Surrey,  Vancouver, Langley, Richmond, Delta, Burnaby, Kitimat, Dawson Creek, Kelowna, Kamloops, Edmonton, Calgary, Red Deer, Peace River, Grande Prairie, Fort McMurray, Regina, Saskatoon etc…

Qualitest Canada’s inspectors have completed many structural steel inspection projects in the past including industrial, institutional and commercial sectors. We take care of your structural steel inspection at any stage you need our service. Our inspectors will visit to your project site and perform the steel structural inspection as per the project requirements.

We are capable of providing full range structural steel inspection in Victoria BC area including visual weld inspection, magnetic particle testing, ultrasonic weld testing, lamination scans, hardness testing and bolt torque testing at the fabrication shop or in the field at the job site. In the past, we have performed full Quality Control inspection programs on offshore drilling platforms and onshore large structural steel projects such the installation of huge structural steel components at various commercial and industrial projects in lower mainland, BC. As we have many years in the structural steel inspection and testing business, we guarantee you with the experience and knowledge you are looking for. We offer a “One-Stop” testing and Inspection service that is second to none.

  • Reviewing the blue prints and IFC drawings
  • Bolt Tension Verification
  • Column verification for verticality (plumbness)
  • Verification of Column to beam connections
  • Joists and bridges verification
  • Metal deck installation inspection
  • Rebar inspection
  • Field Erection Welding Inspection and Testing
  • Interpreting Applicable Codes and Standards
  • Non-Destructive Testing
  • Verification of Welders and Welding operators
  • Verification of Welding Procedures and WPDS
  • Fabrication Shop Welding Inspection and Testing

Contact us admin@qualitests.com today to get a quote.

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020

 

structural steel inspection
qualitest2016 No Comments

Structural Steel Inspection Surrey BC

Structural Steel Inspection Surrey BC

Qualitest Canada provides Structural Steel Inspection Surrey BC through it’s highly qualified CWB Level 2 / Level 3 inspectors. The service area includes Surrey,  Vancouver, Langley, Richmond, Delta, Burnaby, Victoria, Kitimat, Dawson Creek, Kelowna, Kamloops, Edmonton, Calgary, Red Deer, Peace River, Grande Prairie, Fort McMurray, Regina, Saskatoon etc…

Qualitest Canada’s inspectors have completed structural steel inspection projects in the past including industrial, institutional and commercial sectors. We take care of your structural steel inspection at any stage you need our service. Our inspectors will visit to your project site and perform the steel structural inspection as per the project requirements.

We can provide full range structural steel inspections including visual weld inspection, magnetic particle testing, ultrasonic weld testing, lamination scans, hardness testing and bolt torque testing at the fabrication shop or in the field at the job site. In the past, we have performed full Quality Control inspection programs on offshore drilling platforms and onshore large structural steel projects such the installation of huge structural steel components at various commercial and industrial projects in lower mainland, BC. As we have many years in the structural steel inspection and testing business, we guarantee you with the experience and knowledge you are looking for. We offer a “One-Stop” testing and Inspection service that is second to none.

  • Reviewing the blue prints and IFC drawings
  • Bolt Tension Verification
  • Column verification for verticality (plumbness)
  • Verification of Column to beam connections
  • Joists and bridges verification
  • Metal deck installation inspection
  • Rebar inspection
  • Field Erection Welding Inspection and Testing
  • Interpreting Applicable Codes and Standards
  • Non-Destructive Testing
  • Verification of Welders and Welding operators
  • Verification of Welding Procedures and WPDS
  • Fabrication Shop Welding Inspection and Testing

Contact us admin@qualitests.com today to get a quote.

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Material Testing
qualitest2016 No Comments

Metallurgical and Mechanical Testing Services in Vancouver BC Area

Metallurgical and Mechanical Testing Services in Vancouver BC Area

Qualitest Canada has started its second material testing facility in Surrey, BC where the clients can get various metallurgical and mechanical testing services for their projects. Qualitest Canada covers the entire BC including Vancouver, Richmond, Delta, Burnaby, Coquitlam, Langley, Port Moody, Victoria, Duncan, and Nanaimo from its Surrey testing facility.

Qualitest Canada provides various metallurgical and mechanical testing services including the following:

  • Tensile Tests
  • Elevated Temperature Tensile Tests
  • Bolt Pull Tests
  • Compression Tests
  • Guided Bend Tests
  • Macro / Micro Analysis
  • Hardness Tests (Vickers / Rockwell / Brinell)
  • ASTM G65 Abrasive Tests
  • Charpy V Notch Tests
  • Ferrite Tests and many more other tests.

Qualitest metallurgical testing lab is fully equipped to prepare test specimens and samples for all tests. Once the testing is completed, our Engineers will prepare a detailed technical report with test results as per the client’s project requirements. Our Engineers can design specialized tests to meet the unique needs of your project. Qualitest is constantly seeking out new methods and technologies to make our services to you better, quicker, and more cost-effective.

Qualitest’s never ending commitment to its customers is strongly supported by a dedicated and enthusiastic staff. We have highly qualified professionals who have the vast experience and in depth knowledge to work on your projects. The staffs in Qualitest are fully dedicated and enthusiastic to provide you the top notch technical solution for your testing needs. At your service is an Engineering and Technical support group whose academic credentials include Post graduation in Metallurgy, Chemistry and Mechanical Engineering, plus a wide range of under-graduate degrees in Physics, Chemistry, Mechanical Engineering, Material Science, etc.

We provide quick turnaround, reliable results, and quality system that will be a substantial competitive advantage for your company. Dedicated to a philosophy of continuous improvement, Qualitest is constantly seeking out new methods and technologies to make our service to you better, quicker, and more cost-effective.

Please feel free to contact us for a Quote!

B.C: (778) 381-7376​

Alberta: (780) 851-2020

qualitest2016 No Comments

HDPE Pipe Burst Testing in Vancouver BC

HDPE Pipe Burst Testing in Vancouver BC

Qualitest provides HDPE pipe Burst Testing in Vancouver BC area. Qualitest Canada has a fully equipped testing facility in Surrey, BC where your HDPE pipes will be tested as per various ASTM standards and project specifications. Our Surrey, BC facility covers the Lower Mainland, BC which includes Vancouver, Richmond, Delta, Burnaby, Abbotsford, Coquitlam, Langley, Port Moody and the islands i.e Victoria, Duncan, and Nanaimo. Some of our HDPE Pipe testing services are listed below. 

  • Burst Test
  • Tensile Test
  • Tensile Impact Test
  • Three Point Bend Test
  • Torque Test
  • Drop Impact Test

When you are planning to do multiple burst tests, then the cost will be less comparing to just one test. We recommend that you contact our Engineers before you prepare the sample for the burst test which will save your cost and time as you will get a great suggestions and technical clarification from them. 

Because we do everything in-house, our turn out time will be normally 2 to 7 business days. We can also work during the weekends or holidays when there will be requirement. There may be a small price changes for the weekend or holidays work. 

Please feel free to contact us for burst test, or any other tests for your HDPE and Plastic Pipes.  

B.C: (778) 381-7376 

Alberta: (780) 851-2020 

Email: admin@qualitests.com  

Weld Crack Investigation
qualitest2016 No Comments

Welding Engineering Services in Vancouver BC

Welding Engineering Services in Vancouver BC Area.

Qualitest Canada provides wide range of Welding Engineering Services in Alberta and BC. In the province of BC, we provide welding Engineering in the Lower mainland, BC which includes Vancouver, Richmond, Delta, Burnaby, Coquitlam, Langley, Port Moody and the islands i.e Victoria, Duncan and Nanaimo. Some of our services are listed below. 

  • General Welding Engineering Services
  • Weld Procedure development (WPS/PQR)
  • Reviewing old welding procedures against the current version of the codes and standard
  • Reviewing your subcontractor’s WPSs & PQR’s against of your project requirements 
  • Technical Advice to your welding projects 
  • Weld metal failure analysis 

We take care of your Welding Procedure development project from the scratch and get it done faster and economical way. As we have fully functional metal testing lab, we can perform all the required tests in-house and develop the welding procedures as earliest as possible. 

The welding Engineers in Qualitest Canada are specialists in welding procedure (WPS) design, testing, and documentation for new applications and repairs. Depending on your needs, we will design your welding procedure specification to various codes & standards including but not limited to ASME, CWB, API, CSA, AWS and various Project Specifications.

We have CWB retained Engineers and we can also audit your welding facility to maintain your firm’s CWB credentials. Feel free to contact us for any welding engineering you may need for your current or future projects.

B.C: (778) 381-7376
Alberta: (780) 851-2020

testing
qualitest2016 No Comments

What Qualitest Canada can do for your project ‘Mechanical Testing’ requirements in Vancouver Area?

Mechanical Testing in Vancouver

Qualitest provides Mechanical Testing in Vancouver area from its Surrey lab. Qualitest Canada has a fully equipped laboratory in Surrey, BC with highly qualified staffs who can treat your project as priority and get it done in a quicker time frame while also making it inexpensive. From our Surrey, BC laboratory, we can cover the entire Vancouver area (lower mainland) as well as the rest of the BC. 

Qualitest Canada can perform the following mechanical and chemical tests:

  • Vickers Hardness Testing
  • Rockwell Hardness Testing
  • Brinell Hardness Testing
  • Tensile Testing
  • Elevated Tensile Testing
  • Charpy V Notch Testing
  • Guided Bend Testing
  • Nick-Break Testing
  • Bolt Pull Testing
  • Torque Testing
  • ASTM G65 Abrasive Tests
  • Ferrite Tests
  • Positive Material Identification (PMI)
  • OES Chemical Analysers                                                                         

At our facilities in Surrey BC and Nisku AB, Metallic and non-metallic materials can be analyzed for chemical composition, microstructure, material properties, corrosion resistance, and environmental stability. The accurate testing allows us to make proactive recommendations to reduce risk and failure, and to help to identify manufacturing materials for longer lifecycles and safer processes. Our in-house state of the art machine shops provide quick and accurate specimen preparation for all laboratory tests. Our technical libraries contain an extensive collection of materials standards, both current and historical, for evaluating test results

Please contact us for a quote or more information! 

qualitest2016 No Comments

What is the different between Qualitest Canada and other NDT/NDE service Provides in the Vancouver area?

NDT/NDE Services in Vancouver BC

Qualitest provides NDT/NDE Services in Vancouver BC. Qualitest has a fully equipped testing facility in Surrey, BC with highly qualified staffs. Qualitest Canada is covering all the NDT/NDE projects in the Vancouver area / lower mainland and other part of the BC from the Surrey, BC location. We are capable of doing conventional as well as the advanced NDT methods including but not limited to Ultrasonic testing, Phased Array Ultrasonic testing, TOFD, Tank floor scanning with MFL, Coating Thickness Measurement, ‘D’ Shore hardness testing, Field Vickers / Brinnel hardness testing, PMI, Pipeline UT, Magnetic particle testing, Liquid Penetrant testing, Ferrite testing, Visual testing etc. 

Quicker response, quality workmanship and cost effective services are our goal! We believe that these will be differentiate Qualitest Canada from other similar service provides. Please feel free to contact us for all of your NDT/NDE needs in the Vancouver / Lower mainland area and other parts of the BC.

Our highly skilled and knowledgeable engineers and certified technicians using wide range of equipment are capable to solve different NDT problems. NDE/NDT can be applied for both metallic and non-metallic (e.g. polymers and composites) materials. We perform the NDE/NDT during production, post-production or in service in accordance with the project requirements. Qualitest perform the following non-destructive tests (NDT).

Our NDT/NDE staffs are certified to CGSB / ASNT credentials. We have CWB certified Level 2 and Level 3 visual inspectors for your structural steel inspection projects or any projects has the pressure envelope like boilers, pressure vessels, piping systems etc. 

Contact us admin@qualitests.com today to get a quote.

BC: 112, 13085 115Ave, Surrey, BC V3R 0C3, Canada, (778) 381-7376

Alberta: 702 – 23rd Ave Nisku, AB, T9E 7Y6, Canada, (780) 851-2020